Loading Guide - Engineered Solutions
Loading Guide - Engineered Solutions
National
Heavy
Vehicle
Regulator
This page is part of a series of loading guides that provide tips and tricks to help you understand good load restraint. More detailed information on the principles covered can be found in the Load Restraint Guide 2025.
Purpose of this loading guide

This loading guide explains what Engineered Solutions are and how they can be used to safely restrain loads for transport.
The NHVR Load Restraint Guide (LRG) provides practical restraint methods for specific load types. However, some loads, vehicles and operations require a more tailored approach.
In these situations, an engineered solution may be used to design a load restraint system that will safely restrain the load.
Engineered solutions may be used when standard load restraint methods are not suitable, practical or sufficient for a particular transport task. They are commonly applied to specialised loads, unusual load characteristics, complex vehicle combinations, or situations where a tailored restraint system can provide a safer and more effective means of achieving the required load restraint performance.
What is an Engineered Solution?
An engineered solution is a load restraint system that has been designed, assessed and approved by an appropriately qualified engineer for a specific load, vehicle or transport task.
Engineered solutions may include:
- customised restraint equipment such as specialised transport frames, cradles, bolsters or support structures
- custom designed restraint systems incorporating chains, webbing straps, wire rope, blocking, bracing or other restraint devices
- load-rated curtains, headboards, gates or other containment systems
- alternative restraint methods or load configurations not described in the LRG
- combinations of engineering assessments and physical testing used to demonstrate compliance with performance standards.
Note: This list is not exhaustive. Engineered solutions may include any restraint system, load support arrangement, vehicle modification, engineering assessment or testing method used to demonstrate that a load will be restrained to the required loading performance standards.
Unlike general restraint methods, engineered solutions assess the performance of the complete restraint system rather than individual restraint components.


How do Engineered Solutions differ from the LRG?
The restraint methods and examples in the LRG are based on established engineering principles and testing and provide proven solutions for common transport tasks.
Engineered solutions use the same loading performance standards and engineering principles but are tailored to a specific load, vehicle or transport operation.
Factors such as friction, lashing pre-tension, vehicle structures and restraint equipment may be measured and tested rather than based on standard assumptions.
As a result, an engineered solution may use a different restraint arrangement while still meeting the required loading performance standards.

The LRG includes examples of steel coils transported on wedges. In this example, the wedges form an important part of the restraint system by helping to prevent the coils from rolling. If the wedge angle is 39° or greater, the coil cannot roll out under a forward force of 0.8g.
An engineered solution may assess how all parts of the restraint system work together, rather than relying solely on standard assumptions.
This may demonstrate that:
- friction between the load and supporting surfaces is greater than assumed in generic calculations
- wedges, cradles or blocking structures contribute to load restraint
- vehicle structures contribute to load restraint
- different parts of the restraint system work together to restrain the load
- lashings achieve a verified level of pre-tension
- tie-down and direct restraint methods work together
- limited load movement forms part of the engineered design
- physical testing shows the restraint system performs as intended
- specific requirements for restraint equipment, including lashing size, placement, angles, tensioners and vehicle configuration, have been assessed and documented.
Because the performance of the entire restraint system has been assessed and verified, the engineered design may achieve the required loading performance standard using fewer restraint devices than indicated by a generic LRG calculation.
This does not reduce safety requirements. It uses engineering assessment and testing to better understand how the restraint system performs.
Why are Engineered Solutions often kept within an organisation?
Many engineered solutions are developed for specific transport tasks, loads, vehicles or operating environments. The engineering assessments, testing results, drawings and operating instructions associated with these systems are often controlled by the business that owns or uses the design.
For this reason, engineered solutions are commonly provided to:
- employees within an organisation
- authorised contractors or subcontractors
- operators using the restraint system
- parties authorised by the owner of the design.
Users of an engineered solution should ensure they understand and comply with any instructions, limitations and conditions that apply to the system.
Note: If you are unsure of the safest way to transport your loads, refer to the Load Restraint Guide 2025 or seek advice from an appropriately qualified engineer.
Resources
For further advice on load restraint refer to our loading page.
